Amprobe WT-70 사용자 설명서 - 페이지 17
{카테고리_이름} Amprobe WT-70에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe WT-70 20 페이지. Orp meter
The reading is not changed
• If the status is in "HOLD", release the status.
The reading is not changed
• Clean and re-calibrate the probe.
• Replace with a new probe.
Slow response
• Clean and re-calibrate the probe.
• Replace with a new probe.
Wrong real time
• The wrong real time display will not affect the measurement. Contact the
distributor to purchase battery and acquire replacement procedures.
Error code
E02 Reading is under the lower limit .
E03 Reading is over the upper limit .
E04 The original data error result in this error.
E12 Factory calibration data error.
Solution: Re-start meter might solve this error.
E31 Measuring circuit failure.
Solution: Re-start meter might solve this error.
E32 Memory IC failure.
11