DPA 4065 사용자 설명서 - 페이지 2

{카테고리_이름} DPA 4065에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DPA 4065 16 페이지. Headset microphones
DPA 4065에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지), 매뉴얼 (7 페이지)

To ensure optimal performance of

your DPA Miniature Microphone,

please follow the simple care and main-

tenance instructions below.

Miniature Microphones from DPA are

designed to be very resistant to humidity,

moisture and sweat. Highly resistant mate-

rials like gold plated stainless steel, and fea-

tures like the double-vent-protection-sys-

tem are used in construction of the micro-

phones, to avoid damage by hostile fluids.

In any case, it is still a good idea to keep the

Miniature Microphones away from any kind

of unnecessary exposure to water and

cleaning fluids and to keep the microphone

element dry at all times.

Keep dry

CLEANING GUIDE

The cable and protection grid are the only

parts that may be cleaned if necessary. Do

not use any kind of cleaning fluid other

than distilled water. Use of ultra-sonic

baths must be avoided. Avoid all kinds of

spray or fluids, which contain chemical

components to remove static electricity on

or close to the microphone as this could

cause damage to the electret layer.

When mounting the Miniature Microphone

directly on the skin of a performer, care

should be taken to avoid sweat from run-

ning directly into the microphone. If the

microphone gets filled up with water or

sweat it will not be damaged, but possibly

turn deaf while the water is captured

inside the microphone, behind the protec-

tion grid. Remove the water by shaking the

microphone or drying it with a piece of lint

free cloth.

Sweat stopper