Daihan Scientific WUC-A22H 사용자 설명서 - 페이지 14
{카테고리_이름} Daihan Scientific WUC-A22H에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daihan Scientific WUC-A22H 18 페이지. Analog ultrasonic cleaners
페이지 인쇄
DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
Ultrasonic Operation Switch ON to the Lift of ultrasonic motion switch located in the front
-
control. Switch OFF to the down of ultrasonic motion switch after the ultrasonic cleaning
operation.
Heating Operation Switch ON to the Lift of heating motion switch located in the front control.
-
Switch OFF to the down of heating motion switch after the cleaning operation.
Keep the temperature of the cleaning liquid 65
-
Heater On Lamp is Lighted If the Heating operation switch is turned ON. If the OFF state is
-
lights out. This Lamp indicates the operation of the Heater.
② WUC-A02H
Heating
Operation S/W
Place on the desired area by rotating the ultrasonic operation timer. The maximum can be
-
set to 30 minutes. Place on the stop indication when operation to stop.
Heating Operation Switch ON to the Lift of heating motion switch located in the front control.
-
Switch OFF to the down of heating motion switch after the cleaning operation.
Keep the temperature of the cleaning liquid 65 ℃ Heater operation.
-
DAIHAN Scientific, Analog Ultrasonic Cleaners " WUC-A "
< Figure 3.3.2> Usage Instructions of WUC-A02H
Heater operation.
℃
Ultrasonic Operation
Stop Mode
Ultrasonic Operation
Timer
14/36