Amprobe 5XP-A 빠른 매뉴얼 - 페이지 3

{카테고리_이름} Amprobe 5XP-A에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe 5XP-A 6 페이지. Resistance diagnostics for troubleshooting vibrating wire sensors and cables

페이지 인쇄

V1.0

RESISTANCE OF THE THERMISTOR

STEP 1

Set the range to 20kΩ or Ω if using a multi-meter which has automatic ranging.

STEP 2

Connect the T+ (green) conductor to the red lead on the multi-meter and the T- (white) to the black

lead on the multi-meter.

The readings will be dependent on the temperature as below:-

10°C ~ 5.971kΩ (5971Ω)

15°C ~ 4.714kΩ (4714Ω)

20°C ~ 3.478kΩ (3478Ω)

25°C ~ 3.000kΩ (3000Ω)

PLEASE REFER TO THE THERMISTOR LOOK UP TABLE ON PAGE 4

IF THESE VALUES DIFFER THEN THERE IS A PROBLEM WITH THE THERMISTOR OR IT'S

CONDUCTORS