Amprobe AM-100 사용자 설명서 - 페이지 5

{카테고리_이름} Amprobe AM-100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe AM-100 15 페이지.

4) OPERATION

DC Voltage, AC Voltage, & Hz Frequency functions

Note:

1) AC 400.0mV range selection is by RANGE button manually, and is specified from

AC 10mV (AC 40mV for True RMS models AM-105 & AM-110) and up.

2) DC 400.0mV range is designed with 1000MΩ high input impedance for least current

drain in measuring small signals, and can cope better with most commercially available

voltage output transducers and adapters. The non-zero display reading is normal when

the meter inputs are open circuit, which will not affect actual measurement accuracy.

Open input is actually a floating condition, which is not a zero-volt-input condition. The

meter will show zero or close to zero reading when the inputs are shorted.