DPA 4066 사용자 설명서 - 페이지 10

{카테고리_이름} DPA 4066에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DPA 4066 16 페이지. Headset microphones
DPA 4066에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지), 매뉴얼 (7 페이지)

Adjust the approximate position that the

microphone boom should be placed on the

cheek between the ear and the mouth.

Hold the headband when pushing or pulling

the microphone boom. (Please note that

when placed near the ear, the high boost

grid should be used in order to compensate

for the high frequency loss in this position.)

Note: The capsule features an omnidi-

rectional transducer and it is therefore

not necessary to pull the capsule to the

front of the mouth. It can be placed

very discreetly on the cheek and still

produce a highly detailed and clean

sound by using the specially designed

DPA grids. Please see page 4.

Now take up the 4066 and adjust the size

of the headband so that it fits the size of

your head: Start with an oversized head-

band and use both hands simultaneously,

holding your index fingers on the back of

the headband while pushing in the ear

hook parts inwards with your thumbs. If

you want the position of the microphone

boom to be altered at this point, adjust-

ments are still possible, simply by drawing

the boom while holding a firm grip with the

other hand on the headband.

For discrete placement, you can now

choose to bend the microphone boom

slightly so that the capsule is as close to

the cheek as possible. This will minimise