DPA d:fine 매뉴얼 - 페이지 2

{카테고리_이름} DPA d:fine에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DPA d:fine 13 페이지. Headset & earset microphones
DPA d:fine에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지), 사용자 설명서 (4 페이지)

페이지 인쇄

Introduction

All d:fine

Headset Microphones provide a uniquely natural and open

sound. Ultra-lightweight and adjustable, these mics ensure a secure and

comfortable fit in live performance environments. To ensure optimal performance

of your d:fine Headset Microphone, please follow the simple instructions below.

Placement of microphone

For discreet placement, you can bend the microphone boom slightly so that the capsule

is placed in the desired position. Do not hold the capsule while bending; bend the wire

boom, making a smooth curve

with your thumb to best fit the

profile of the face.

Mount a directional mic 2-3 cm

(1 in) from the corner of the

mouth to ensure optimal sound

quality compared to an omnidi-

rectional mic that can be placed

further away from the mouth.

Omnidirectional characteristics

• The mic is sensitive to sound from all directions

• The sound remains more or less the same regardless of the distance

between the sound source and the mic

• The positioning of mic with omni characteristics is less critical than with

directional

• An omnidirectional microphone is generally not very sensitive to wind,

breathing, pop and handling noises

Directional characteristics

• Rejects background noise and creates higher separation

• The mic is most sensitive to sound on one side (marked on some variants)

• The positioning of mics with directional characteristics is essential as the low

frequency level will change according to the distance to the mouth, known

as proximity effect

• Choose a distance that yields the desired amount of bass

• Care should be taken to protect against wind and pop noise e.g. by using

a windsceen