Daihatsu EDM18ZII 사용 설명서 - 페이지 7

{카테고리_이름} Daihatsu EDM18ZII에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daihatsu EDM18ZII 16 페이지. Microprocessor-controlled door operator

페이지 인쇄

llom

&onal

s.eflsor

lamp)

IWlld> (10050(

3. Half-open operation

For half-open door operation.

With the half-open adjuster,

range 12.5% to 87.5% of the full door stroke;

select between automatic

the Automatic/Constant

turn the external half-open selector switch ON.

Opening:

When an ON signal

door opens at high speed and is braked to a halt to reach the half-open

position.

Closing:

The door closes in the same manner as for normal closing.

With the Automatic/Constant

If the ON signal from the sensor switch continues

Operator opens the door to the fully open position.

the closing stroke from the half-open position,

position. But if another ON signal is received again on the next closing stroke, the

door reverses and travels to the fully open position.

low.

Br king .peed

c..stooning

Door

~ame

CUIhionong ",eke

50 • 70 nvn

0001 &lloko

select one of the seven steps available within the

full/half-open

switch; then

is triggered

Power to the motor

switch in Automatic:

Dmer

Open

High'lpeed

_-----

.•.

Pros •.

opened

000J .troll.u

switching and constantly

by the sensor

switch,

is shut off.

for 7 seconds or longer, the Door

If an ON signal is triggered on

the door reverses to the half-open

low.

Br. ing 'peed

CUlhion","

Door

h"",

•••• ed

Cuohaontog siroN> 50 • 70 mm

--t-j--

half-open

the

•

with