Daihen MWP-18 사용 설명서 - 페이지 7
{카테고리_이름} Daihen MWP-18에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daihen MWP-18 19 페이지. Tig welding torch
페이지 인쇄3.
Handling Precautions
3.1 Coolant
CAUTION
● NEVER apply air-cooling.
● NEVER use a welding torch that had a water leak because doing so might cause an electric
shock.
3.2 Cable Hose
CAUTION
3.3 Replacement of Parts
CAUTION
Do not directly touch the high-temperature parts of a nozzle, an electrode and so on.
●
When welding, wear suitable protection such as leather gloves for welding.
●
Do not replace torch tip elements before they cool off.
●
CAUTION
● Be sure to place an order for replacement at our sales office or our agency.
CAUTION
● Follow safety instructions of a grinder or an electrode grinder when grinding an electrode.
HANDLING PRECAUTIONS
● Be sure to keep the flow of coolant at more than 1 liter per minute.
(Water pressure of more than 0.1 to 0.3 MPa is required at a torch
inlet). Insufficient flow of coolant may damage a welding torch.
● Never let cable hoses touch any heated part of the welded, put
something heavy on top nor bend them excessively because the
welding torch might become damaged.
● To prevent burns, observe the following.
● If any parts are damaged, replace them with new ones for further
safety and better quality.
● Wear protective glasses for eye protection when grinding an electrode.
−S6−