Amprobe DGC-1000A 사용자 설명서 - 페이지 13

{카테고리_이름} Amprobe DGC-1000A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe DGC-1000A 20 페이지. Clamp-on ground resistance tester

Find Quality Products Online at:

5-4. Setting the Sampling Interval

1. Press the FUNC button until letters of "SEC" are shown in the

upper row of LCD.

2. The unit shows the current sampling interval in seconds.

3. Press the ▲ or ▼ button to increment/decrement the value by 1

second. As users hold the button longer, the speed of

incrementing/decrementing will become faster. The value can be

incremented/decremented from 0 to 255 / 255 to 0 seconds. Value

will roll over when the value of maximum 255/minimum 0 seconds

is reached.

4. Press the FUNC button several times until the upper row LCD show

no letters.

The unit will start data logging if the REC button is pressed, and a

symbol of REC will be shown in LCD. Data will be recorded at the

specified sampling interval.

Data logging will be stopped if the memory is full, or the unit detects the

condition of low battery, or the REC button is pressed again.

NOTE: If the sampling interval is set at 0 seconds, only one data is

recorded. To record next data, users can press the REC button again.

The record number is also displayed for about 1 seconds.

GlobalTestSupply

www.

.com