Amprobe TMD-52 사용자 설명서 - 페이지 13

{카테고리_이름} Amprobe TMD-52에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe TMD-52 18 페이지. K/j/t/e type

"" Button

The "" key changes setting digit. (See "SET mode"

later in this manual.)

" Button

The "q" key decreases the setting value. (See "SET

mode" later in this manual.)

Relative value set, Hi/Lo Limits value set and Cool

Junction Compensation value set. Press "SET" key

to enter SET mode. The LCD displayed "SET" and set

annunciator is displayed.

Set Relative value

Press "SET" key to enter SET mode, then Press "REL"

button to set relative value. First, "REL" displayed on LCD

and wait for one second to enter SET REL mode.

SET", "REL" and "T1" annunciator are displayed.

Press "p", "q" to increase or decrease blink digit, press

"" to change blink digit.

If have no blink digit, press "p", "q" to set the positive

or negative for this relative value. Then press "ENTER"

key, stored the relative value for T1, enter set relative

value for T2. In this Relative SET mode, the value can not

be ±1999.9 counts. If this value more than ±1999.9 counts,

"Err" displayed and re-input.

Set Hi/Lo Limit value

Press "SET" key to enter SET mode, then press Hi/Lo

button to set Hi/Lo Limit value. "SET", "LIMIT", "Hi" and

"T1" annunciator are displayed.

Press "p", "q" to increase or decrease blink digit, press

"" to change blink digit.

If have no blink digit, press "p", "q" to set the positive

or negative for this Hi/Lo Limit value. Then press "ENTER"

key, stored the Hi Limit value for T1, enter set Lo Limit

value for T1. In this Hi/Lo Limit SET mode, the value can