Daiichi Electronics FSPTT2-92A-33 사용 설명서 - 페이지 14

{카테고리_이름} Daiichi Electronics FSPTT2-92A-33에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daiichi Electronics FSPTT2-92A-33 16 페이지. Power flow three phase power factor transducer

페이지 인쇄

9. Calibration

Because this product is adjusted, there is not need of calibration especially.

However, if discrepancy arises in an output in long-term use, please adjust in the next way.

Remove the terminal cover and VR cap before adjustment, and attach the VR cap and terminal cover after adjustment.

(1) For the output load, connect an actual load (within the output load range indicated on the name plate)

or a simulated load with the same resistance value as the actual load.

(2) Apply the auxiliary power supply (rated) and the input equivalent to 50% of the rated output value, and

energize for 15 minutes.

(3) Enter the lower limit of the rated output range and adjust with BIAS adjustment VR so that the output

becomes the lower limit.

Next, enter the upper limit of the rated output range and adjust the MAX adjustment VR so that the output

reaches the upper limit.

(The screwdriver for adjustment：Tip width of 1.8 to 2.3mm, Phillips-head screwdriver or flat-blade

screwdriver)

Q-222-032