Daiichi Electronics FSPTT2-92A-33 사용 설명서 - 페이지 8

{카테고리_이름} Daiichi Electronics FSPTT2-92A-33에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daiichi Electronics FSPTT2-92A-33 16 페이지. Power flow three phase power factor transducer

페이지 인쇄

6. Handling explanation

Please handle it correctly after paying attention to the following points.

(1) When applying the auxiliary power supply and input, check that the voltage and input signal of the

auxiliary power supply conform to the specifications of this product.

(2）Make sure that the external wiring is connected to the specified terminal position (listed on the

nameplate).

(3）Please use the output load within the output load range indicated on the name plate.

If the output load range is exceeded, not only will the output error, but the product will be

burdened. Especially for voltage output products, do not short-circuit the output.

This product will not be damaged even if the output terminal is left open in the current output

specifications. However, a voltage of about 15V is generated.

(4）The output adjustment range is BIAS：±5% of the output span, MAX.：±5% of the output span.

Use only when adjustment is required for matching with connected devices.

(5）The output value near 0 power factor switches between the power receiving side and the power

transmitting side within the range of LAG 90° or LEAD 90° ±3° (at rated current).

(Indefinite)

(6）The output value when only the auxiliary power supply is applied or when the auxiliary power supply and

voltage input are applied is the output equivalent to the power factor 1 for power receiving.

7. Specification

7.1 Rating

Item

Power flow

power factor

Rated voltage

Input

Rated current

Power consumption

Output

(Output load range)

Power supply

range

Power

consumption

Auxiliary

supply

Inrush

current

(Time

constant)

２

Note(

) Refer to the specification code for other ratings.

Power transmission / Power receiving LEAD 0.5 to 1 to LAG 0.5

Power transmission / Power receiving LEAD 0 to 1 to LAG 0

AC110V 50/60Hz Balanced positive phase sequence

AC220V 50/60Hz Balanced positive phase sequence

AC 1 A 50/60Hz

AC 5 A 50/60Hz

Voltage circuit：0.2VA (AC110V), 0.5VA (AC220V)

Current circuit：0.2VA

DC0 to 5V

(600Ω or more)

DC1 to 5V

(600Ω or more)

DC-5 to 5V (600Ω or more)

DC0 to 1mA (10kΩ or less)

DC4 to 20mA (550Ω or less)

DC-1 to 1mA (10kΩ or less)

AC80 to 264V 50/60Hz

DC80 to 264V

DC20 to 57V

2.5VA (AC100/110V), 3.5VA (AC200/220V)

1.5W (DC100/110V, DC200/220V, DC24V, DC48V)

AC110V：1.3A or less（2.8ms)

AC220V：2.5A or less（2.8ms)

DC110V：0.9A or less（2.8ms)

DC220V：1.8A or less（2.8ms)

DC24V ：1.5A or less (5.3ms)

DC48V ：3.1A or less (5.3ms)

Specification

AC/DC power supply

Q-222-032

２

(

)

Please specify

２

(

)

Please specify

(

２

)

Please specify

２

(

)

Please specify