Ampronix LUMIMAXX G11S 사용자 설명서 - 페이지 7

{카테고리_이름} Ampronix LUMIMAXX G11S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ampronix LUMIMAXX G11S 20 페이지. 19"

Safety Information (cont.)

CAUTION

Handle with care when carrying or transporting the unit.

Disconnect the power cord and signal cables, and remove the optional unit. Moving the unit with the

cord or the optional unit attached is dangerous, and may result in injury or damage to the unit.

When handling the unit, grip the bottom of the unit firmly with both

hands ensuring the panel faces outward before lifting.

Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.

Do not place any objects on the ventilation slots.

Do not install the unit in a closed space.

Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment

damage.

Do NOT touch the plug with wet hands.

Doing so may result in a fire or electrical shock.

Periodically clean the area around the plug.

Dust, water, oil, or other residue on the plug may result in a fire.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in an electric shock.

If you plan to leave the unit unused for an extended period, disconnect

the power cord from the wall socket after turning off the power switch

for the safety of your work environment and to preserve power.

LCD Panel Information

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew

condensation may occur inside and outside the monitor. If you observe or believe that this is the case, do

not turn the monitor on until dew condensation disappears. Use otherwise may result in damages.

In order to suppress the luminosity change by long-term use and to maintain the stable luminosity,

please use the monitor with lower brightness settings.

The screen may have defective pixels. Thesepixels may appear as a slightly lighter or darker area on the

screen. This is due to the characteristics of the panel itself, and not the product.

The backlight of the LED panel has a fixed life span. When the screen becomes dark or begins to flicker,

please contact your dealer.

Do not press on the panel or edge of the frame strongly. Do not scratch or press on the panel with any

sharp objects. Do not attempt to brush the panel with tissues. Any of these may damage or scratch the

LED panel. Avoid displaying images for long periods of time with the use of a screensaver or timer.