CARBONE TCS 매뉴얼 - 페이지 2
{카테고리_이름} CARBONE TCS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CARBONE TCS 2 페이지. Electronic weighing scale
페이지 인쇄PRODUCT DESCRIPTION
*The scale must to be placed on a stable and flat platform.
You should adjust four underside bolt to make the scale
in horizontal position, the switch on the power(put on
special weighing pan first if necessary).The scale can't
be used in tare state for long time, otherwise the auto
zero-tracing function will be invalid, and the zero point
will excursion.
8
9
10
3
1
Adjustable feet
Weighing pan
1
2
Applicable to uneven surface
Tray plate / Flat plate
Folder
Fence
3
4
90 degree folding
Detachable
Switch
Power cord interface
5
6
With waterproof cover
Connect to the power
Function button
Weight window
7
8
Enter unit price and settings
Display the weight of the object
Unit price window
Total window
9
10
Display the entered unit price
Show total amount
SPECIFICATION
Rechargeable accumulator inside, you can use the scale
during recharging.
Auto zero-setting when switch on the scale.
Auto zero-tracing.
Power supply: AC 200V （ ±10%） /50HZ， DC 4V/4Ah
(Rechargeable accumulator inside).
Working temperature range:0℃~+40℃
Relative humidity:≤85%RH
7
6
5
KEY DESCRIPTION
Number
buttons
4
Storage
unit price
2
Contact number
Number
buttons
Storage
unit price
【0】 ~ 【 9】 key: Input the unit price, from the right to the
left circularly, press any number key to clear the former
unit price after 3 seconds, meanwhile this number is
inputted.
【 . 】 key: radix point press, input the integer part before
press and decimal fraction after press the key.
【C】 key: Press this key to clear the inputted unit price
under weighing state.
【ADD】 key: Press this key to accumulate the money，
and the "ADD" symbol is appeared , the weight window
displays "Add", the unit price window displays "----", "-----"
means the accumulated times, the price window displays
the total money,. Press any number key to exit from this
state with the memory of accumulating held, and then the
scale comes back to weighing state and waits for the next
accumulating.
【Zero/Tare】 key: Set the weight window to zero. (Range
of tare setting: weight：≤1/3F.S)
*Press this key, set the weight window to zero, and the
"Zero/Tare" symbol is appeared.
*Take away the weight object, the weight window displays
Clear
negative, press 【 Zero/Tare】 key again, set the weight
window to zero, and the "Tare" symbol is disappeared.
Cumulative
amount
【 】 key: This key is the back-light key. Press this key to
Current battery
V
voltage
turn off the backlight or turn on the backlight. Starting
up default is to display the backlight automatically.
Deduct tare
Adjust brightness
【 】 key: This is the customer service phone. Press this
key, three windows show "customer service phone" and
press any key to exit.
Counting
function
【 】 key: This is the counting key, press this key, put a
Change / Set
number of products, input the number of products, press
this key to set sampling to complete, can achieve counting
function. Press this key again to exit.
【SET】 key:
Clear
*Press this key to enter change function (it's no use when
price window display zero or "------"), when the weight
Cumulative
amount
window display "—PAY—", unit price and price window
display "----", clew to enter the price needed to charge.
V
Current battery
voltage
Then press "0-9" number key to enter the charged price
and displayed in the unit price window, when the price
Deduct tare
entered is higher than original counting price, the price
Adjust brightness
window will display the present change number. In this
Store
Set
state, press "clear" key can clear the inputted charge price
and the unit price and price window will show "-----" to clew
to enter new charge price. Press the 【 SET】 key again, the
scale will exit change function to be in weighing state.
*Long hold down this key, The amount window display
"SAVE", input unit price, save in 【 M1】