Carcam D4 사용 설명서 - 페이지 4

{카테고리_이름} Carcam D4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carcam D4 9 페이지.

EV (Exposure Value)

You can only achieve the desired result on a trial and error basis as there are several + & - options

available, but in our experience, it is very rare for the need to adjust this setting. Press button (4) to

see the options and navigate these using buttons (7) & (8). Blue is the colour used to highlight an

option and confirm the option using button (4) and the menu will revert to the video menu page.

Carcam.ie has set the EV to 0.0.

TIME STAMP

G-SENSITIVITY

Carcam.ie has set the G-Sensor to medium. Please note that sometimes the G-Sensor may have to be

adjusted to the high setting. If you notice locked files on the memory card when you're reviewing

footage, it means the G-Sensor has been triggered and this can happen if the vehicle is on rough terrain

or has sudden stops / change of direction. In such a scenario, set the G-Sensor to high.

The camera software allows the owner to adjust the

exposure value of the front camera lens. It is

recommended to use the default 0.0 setting, but if you

find the footage darker than you would like, which may

happen in the depths of winter, you can open the EV to

allow more light into the camera. The guide is if the

picture is dark to open the exposure using a plus (+)

settings, or if you think the footage is too bright,

possibly in the middle of summer, then close the EV

using a minus (–) setting.

The Time Stamp refers to the information displayed

on screen during playback. The three options are;

Off (no info), Date Only or Date and Time. Press

button (4) to see the options and navigate these

using buttons (7) & (8). Blue is the colour used to

highlight an option and confirm the option using

button (4) and the menu will revert to the video

menu page. Carcam.ie has set the camera to Date &

Time stamp as this information may be vital in the

event of the footage being required after an

accident.

There are 3 options here; Low, Medium & High. The

G - Sensor is triggered in an accident and will

automatically lock the footage from immediately

before the impact and in the aftermath of the

accident. This footage will be stored in a file on the

memory card which cannot be over written. Press

button (4) to see the options and navigate these

using buttons (7) & (8). Blue is the colour used to

highlight an option and confirm the setting using

button (4) and the menu will revert to the video

menu page.