Carcam G-800 설치 및 사용 설명서 - 페이지 3
{카테고리_이름} Carcam G-800에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Carcam G-800 13 페이지.
9. Micro SD Card Slot
10. AV Interface
11. USB/Charging
12. Speaker
13. Reset Button
14. Back Holder
15. LED fill in light
16. Lens
Button Function
:
ON/OFF Button
MENU Button
MODE Button
Up Select Button
Down Select Button
OK Button
Long press to turn on/off.
When powered up, short press to turn on/off infrared
fill in light.
Short press to enter function setting menu. (Note: you
can only enter this menu when the camera is not
recording, so press the OK button [button 7] to stop
recording and then the MENU button to enter the
Menu). When in the Menu, pressing the Menu button
will exit the menu setting.
In images or video browsing mode, press the Menu
button to delete option.
In standby mode, press it to record, take photos and
replay.
When recording, long press the MODE button to lock
the video. (Note: This is an option if you and the
camera witness something which you're not
involved in, but could offer evidence if required).
In the dual camera recording mode, press to switch the
camera display from Front, to Rear, to Dual display.
In the MENU mode, press to navigate the menu
options.
This button is also used to browse the pictures in the
picture replay mode.
In the video replay mode, press to fast backward.
Long press this button to switch motion detect from
on/ off.
In the dual camera recording mode, press to switch the
camera display from Front, to Rear, to Dual display.
In the MENU mode, press to navigate the menu
options.
It's used to browse the pictures in the picture replay
mode.
In the video replay mode, press to fast forward.
Under the standby and recording mode, short press
Down Select Button to switch audio recording from
on/off.
Long press it, to open parking monitor.
While recording video and taking pictures, press to
start/stop.
In the MENU mode, press to conform Menu setting.
In the video replay mode, press to play the video;
Note: The device does not support GPS at the moment.