Ampt ANALOGER ADG-1 사용자 설명서 - 페이지 10

{카테고리_이름} Ampt ANALOGER ADG-1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ampt ANALOGER ADG-1 20 페이지. 100% analog bucket brigade delay

LFO MODULE

The Low Frequency Oscillator (LFO) module is a modulation source for

animating your delay time and varying the pitch and time. Unlike

traditional delays, our LFO uses exponential modulation for musical and

balanced movement in a musical frequency domain, the way the ear and

brain want to hear it. In the synthesizer world this is the familiar

Volt/Octave tracking used for pitch and amplitude. Our modulation is

symmetrical around the time setting, changing above and below it. This

means that as you reduce the LFO amount the pitch and time will stay

centered where you have it and not shift one direction as with traditional

modulation.

RATE: The RATE knob adjusts the speed

or rate of modulation from about 0.08Hz

to 40Hz (wider range via control voltages).

Lower settings provide slow whoosh or a

rhythmic pitch shift. Medium speeds are a

chorus like effect while faster rates

provide a gargle, bubble or vibrato sounds.

AMOUNT: The Amount knob controls the

range of pitch movement at the speed of

the LFO aka the amount of effect. Use low amounts for subtle shimmer and

larger amounts for octave or greater pitch shifts or spaceship warbles.

LFO SHAPE SWITCH: Selects a slewed square wave or a rounded

triangle wave. At higher speeds the shape becomes more and more rounded

or slewed. Use triangle wave for traditional modulation and square waves

for pitch jumps above and below the note played.

Be sure to read the control voltage section for information on this module

with expression pedals or control voltages.

<10>