Amptek X-123 사용자 설명서 - 페이지 13
{카테고리_이름} Amptek X-123에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amptek X-123 18 페이지.
Amptek X-123에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (12 페이지)
페이지 인쇄XR-100FastSDD User Manual
5.6. Amptek 70 mm
2
FAST SDD® Specifications
General
Detector Type
Silicon Drift Detector (SDD)
Detector Size
70 mm
Collimated Area
50 mm
Thickness
500 m
Collimator Type
Internal Multilayer
Preamplifier Type
CMOS reset type
Energy resolution @ 5.9 keV (
123 to 135 eV FWHM (guaranteed) at Tpk=4.0 s
127 eV (typical) at 1.0 s
139 eV (typical) at 0.2 s
Energy resolution @ C K
: 45 eV (typical)
Other Performance
Peak to background
> 20,000:1 (typical)
Signal risetime
< 60 ns
Maximum input
> 1 Mcps
count rate
Throughput &
Determined
count rate stability
processor & its settings
Window Options
Be
1/2 mil (12.5 m)
1 m Parylene on each
C series (low energy)
Grid: Hexagonal, 15 m
thick Si, 78% open area
C2 is NOT LIGHT TIGHT
Signal Output
Sensitivity
3.6 mV/keV
Gain stability
<20 ppm/
Polarity
Positive signal
Reset range
-0.05 to 2 V (typical)
Cooling
Cooling performance
T > 85
Cooler type
Temp monitor
2
Power
2
HV Bias
Max cooling power 3.5 V / 0.45A
Total power
Other
55
Fe)
Operating range
Storage & shipping -40°C to +85°C, 10% to
RoHS
Lifetime
Warranty Period
by
signal
C2
40 nm Si
N
3
4
30 nm Al
30 mm
2
o
C
o
C
13
Two-stage thermoelectric
Diode
-100V to – 180V @ 25
< 2 W (full cooling)
-35°C to +80°C Performance
degrades at elevated detector
temperatures.
90% RH noncondensing
Compliant
Typical 5 to 10 years, depending
on use
1 year
Preamplifier Options
Amptek's FAST SDD® is available with the XR-100
preamplifier, with the PA210 or PA230 OEM preamplifiers,
or as part of the X-123 and X-55.
Signal Processing Options
Amptek's FAST SDD® may be used with Amptek's DP5 or
DP5-X, or the PX5, or as part of the X-123 or X-55.
Specification Notes
Performance listed here is measured at full cooling (<220K).
The "peak to background ratio" is the ratio of counts in the
Mn Kα peak channel to the counts at 1 keV.
"Gain stability" refers to the change in sensitivity when the
preamp temperature changes but the detector temperature
is stable.
Operating Notes
Detector must be operated with an appropriate heat sink.
The FAST SDD® is suitable for vacuum applications. Amptek
provides several system configurations.
A