Cardax Prox Plus Mifare 설치 참고 사항 - 페이지 6

{카테고리_이름} Cardax Prox Plus Mifare에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cardax Prox Plus Mifare 16 페이지.

Press the base extrusion into the 20 mm (3/4 inch) hole and secure

the base to the mounting surface using the four fixing screws.

Fit the screw caps over each fixing screw. The screw caps prevent

water from entering the reader via the fixing holes. The caps must

be installed for the Prox Plus Mifare reader to comply with the

environmental specification.

Note:

It is very important that the base of the reader is flush with and tight

against the mounting surface. If you are mounting the Prox Plus

Mifare reader on a rough surface you should make the surface as

smooth as possible under the reader and up to 25 mm (1 inch)

around the reader.

Note:

The grommet through which the cables feed into the base of the

Prox Plus Mifare reader helps to keep the device waterproof.

Part number 3C4480 R10

May 2005