Amptone Lab XY MIDIPAD MINi 사용자 설명서 - 페이지 2

{카테고리_이름} Amptone Lab XY MIDIPAD MINi에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amptone Lab XY MIDIPAD MINi 4 페이지. For electric guitar

INSTALLATION

XY MIDIpad mini is intended to be installed by professional luthiers and guitar repair/custom shops only. It requires

significant woodworking, as well as having appropriate tools and being able to use them in a safe manner. AmpTone Lab

cannot be held responsible for any damages that may occur during installation.

MAIN CAVITIES

XY MIDIpad mini needs to be installed inside electric

guitar body. XY MIDIpad mini installation requires you

to route out two cavities behind your guitar bridge.

The first cavity should measure 84 x 65 mm. It should

be very shallow (1.5 mm). This is where the touch

screen will be placed. The second cavity should be

made inside the first one, right in the middle of it.

Recommended dimensions for the second cavity are

73 x 54 mm. It should be 16 to 19 mm deep (17.5 to

20.5 mm measuring from the guitar body top).

CONTROL CAVITY

XY MIDIpad mini kit comes with additional components,

which need to be connected to the controller unit.

These components are hold button, on-off toggle

switch, battery clip, rotary encoder and MIDI connector.

The aforementioned components can be installed

wherever you feel comfortable with having them. The

best place for the on-off toggle, rotary encoder and hold

button is probably the control cavity where your guitar

pots are located. As far as MIDI connector goes, the

most convenient place for it is right next to your guitar

output jack. After mounting these components, all that

is left is to connect all components to their respective

connectors on XY MIDIpad mini controller unit.

SIDE VIEW

65 mm

54 mm

84 mm

73 mm

1.5 mm

18 mm