Advanced Bionics HARMONY 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Advanced Bionics HARMONY에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced Bionics HARMONY 20 페이지. Hiresolution bionic ear system
Advanced Bionics HARMONY에 대해서도 마찬가지입니다: 매뉴얼 (5 페이지), 매뉴얼 (5 페이지), 문제 해결 (4 페이지)

페이지 인쇄

Step 3:

Connect the cable from the power supply to the charger.

Step 4:

Insert the power adapter that you connected to the power supply into an outlet. A

green light on the charger will light up when there is a proper connection.

Step 5:

Slide the PowerCel onto the charger. You can charge up to four PowerCels at once.

There are two indicator lights for each PowerCel slot. The orange light indicates that

the PowerCel is charging. This light will turn off when the PowerCel is fully charged.

The PowerCel recharges in 4–5 hours. A red light indicates that there may be a

problem with the PowerCel.

Assembling Your Harmony Processor

Step 1:

To attach the earhook, simply align and push into place.

4 Quick Start Guide for the Auria™ Harmony™ Processor • English

Connect Power

Adapter Here

To Charger

Step 2:

Slide a fully charged PowerCel onto the processor. This will turn on the processor.

The ORANGE LED Status Indicator should flash two or more times to verify that the

PowerCel is sufficiently charged.

Step 3:

To attach the chosen Color Cover (optional), simply align and press into place.

Step 4:

Attach the headpiece cable by sliding it into the headpiece cable connection port of

the processor.

Wearing Your Harmony Processor

Step 1:

Set the program switch to the appropriate program and turn the volume down by

moving the volume dial in a counterclockwise direction.

Quick Start Guide for the Auria™ Harmony™ Processor • English 5

LED Status Indicator

Volume Dial

Program Switch