AMQ Concur 설치 매뉴얼 - 페이지 3

{카테고리_이름} AMQ Concur에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMQ Concur 7 페이지.

PHASE 1 | Concur Assembly

Step 1

Select one leg (A) and attach it to the middle

frame (B) with one of the D screws. Tighten a bit

but not completely.

Insert a second D screw and loosely tighten.

Now tighten both (D) screws completely.

Next, tighten the (E) screws in the same method

you used for the (D) screws, leaving loose until

all 4 are in place and then tightening.

Repeat with the other leg.

Step 2

Twist to insert the (C) push button bracket,

followed by the button cover. Repeat on the

other side.

Detail

CONCUR INSTALLATION GUIDE | 3

Detail

If Installing Modesty Panel:

Step 3

Connect the Panel Brackets (K) to the middle

frame (B), locking it with the (L-1) screws (x2).

Connect the Modesty Panel (J) and panel

brackets with the (L) screws (x4).

Step 4

Turn the work surface upside down and center

align the Worksurface Support (F) using the (G)

screws (x2). Now turn the leg and middle frame

assembly upside down. Attach the worksurface to

the cantilevers of the frame assembly using the (I)

screws (x6). Insert the castors firmly into the legs

until locked in place.

Step 5

Turn your finished CONCUR table over to use.

L-1

amqsolutions.com