DPS Telecom T/Mon SLIM 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} DPS Telecom T/Mon SLIM에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DPS Telecom T/Mon SLIM 7 페이지.
DPS Telecom T/Mon SLIM에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지)

페이지 인쇄

Fig. 2 - Setup Rule for allowing all information that is seen by the

Next, we need to create the "job" and data connection for the ASCII device. Keep hitting

<ESC> to go back out to the Main Menu. Go to 'Parameters', 'Remote Ports', then hit F

for 'Find'. Enter in an available job number between 50 and 499. (All jobs 50 and above

are for LAN-based connections)

Hit E for 'Edit' and then <TAB> to select an ASCII INPUT job. Hit <ENTER>.

4. Here, you will enter in a port description. (For a full description of ASCII port

connection options please review the user manual section M6-60. This document will

cover only the basic steps needed to setup an ASCII job and rule assignments.) You will

notice below that we changed Auto Databasing from NO to YES. This will allow the

T/Mon to auto database alarm points as they are sent. Another important option we will

activate is the Log All Activity. Make sure this is set to YES. This is a good

T/Mon to be processed and recorded to a log file.

Fig. 3 - Create ASCII Input job