DPW Design Attenuverter AV2 매뉴얼 - 페이지 3
{카테고리_이름} DPW Design Attenuverter AV2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DPW Design Attenuverter AV2 4 페이지.
페이지 인쇄Wide stereo filter control with spread
other LFO to B in and you can control both stereo filter sweep and spread sweep at the same time.
To make the patch even more interesting. Connect A>B to the resonance control of both filters and
set the amount to taste with the knob.
Rhythmic pattern generator
When set up this way don't forget that you also have the outputs A, B and SUM to modulate other
parts of your system.
DPW Design, Häradsvägen 200, 14171 Segeltorp, Sweden
www.dpw.se
This example shows how to filter a mono sound into
stereo.
Connect a mono audio signal into two filters.
Connect A out to the cutoff frequency control of VCF1
and SUM to the cutoff frequency control of VCF2.
Set the knobs as shown in the picture.
A now controls the cutoff of both filters and B will be
the frequency spread control.
To expand the patch:
Turn SUM max counter clockwise. Now when you turn
A up the frequency of VCF2 will go down and you will
get a stereo effect.
To add movement. Connect an LFO to A in and an
The AV2 can be used to produce pseudo-random like
rhythm patterns to trigger other modules. For
example drums.
Connect a sine or triangle LFO to A and an other not
synced sine or triangle LFO to B.
Use the A>B output as a trigger to some other
module.
By just varying the setting of A and B you can get at
number of interesting rhythmic patterns with variable
length that has a base length in multiples of the two
LFOs fed to it.
This may sound a bit technical but try it to expirence
what it does.
If one of the LFOs are synced with for instance a
drum machine this pattern will make rhythmic sense
together with the drum machine but still have what
seems to be a life of its own.
MAN-AV2 Rev B