DQ Vela Electric 사용 설명서 - 페이지 10

{카테고리_이름} DQ Vela Electric에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DQ Vela Electric 18 페이지.
DQ Vela Electric에 대해서도 마찬가지입니다: 설치 및 수정 (4 페이지), 지침 (2 페이지)

FUNCTIONS

The following functions can only be managed via an application or the remote control.

[Page 14]

[Fig. 8]

1. STAND-BY

In STAND-BY mode, the radiator does not heat up.

2. MODE FIL PILOTE

FIL PILOT is a special communication protocol that allows the radiator to be managed by a

special control unit. NOTE: this connection is only possible for Class II models supplied

without plug. The modes are managed by the central, while the temperature setting is

managed by the user on the chronothermostat.

6 types of command are recognized.

Comfort : set point = comfort mode temperature.

2) Night reduction : set point = comfort -3.5°C

3) ECO1 : set point = comfort -1°C

4) ECO2 : set point = comfort -2°C

5) Antifreeze: set point = 7°C

6) Stop: no temperature regulation, radiator off. Mode STAND-BY.

The reference temperatures are those deﬁned in comfort mode.

3. MODE COMFORT

In Comfort mode, you can set the desired temperature with the app or the remote control.

The radiator remains ON until the set temperature is reached. The Comfort program is

indicated by the red light. The selected temperature is also used for the weekly program

(par. 9) as a comfort level and in FIL PILOTE mode (par. 2) as a comfort temperature point.

4. NIGHT MODE

In Night mode, you can set the desired temperature with the app or the remote control.

This temperature is independent from the comfort temperature. The NIGHT program is

indicated by the blue light. The selected temperature is also used for the weekly program

(par. 9) as night level temperature.

5. ANTIFREEZE (blue led)

In this operating mode, the temperature cannot be adjusted by the user, but is ﬁxed at 7 ° C.

The antifreeze mode is indicated by the flashing blue light. This mode prevents the ambient

temperature from falling below 7 ° C.

6. MODE PROGRAM

Radiatori 2000 Smart is a 24/7 programmable thermostat.

In this operating mode, the thermostat regulates the temperature according to the daily program,

using comfort temperature or night setback temperature programmed. The function is indicated

by the flashing green light. The selected temperature is displayed on the screen of the

smartphone.

To program the thermostat, go to paragraph 9.

[Fig. 9]

[Fig. 10]

[Fig. 11]

[Fig. 12]

[Fig. 13]