DR TRIMMER/MOWER BEAVER BLADE 안전 및 작동 지침 매뉴얼 - 페이지 9

{카테고리_이름} DR TRIMMER/MOWER BEAVER BLADE에 대한 안전 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DR TRIMMER/MOWER BEAVER BLADE 12 페이지. Dr trimmer/mower beaver blade safety & operating instructions
DR TRIMMER/MOWER BEAVER BLADE에 대해서도 마찬가지입니다: 안전 및 작동 지침 매뉴얼 (17 페이지)

페이지 인쇄

Twist the file a half turn with each stroke into the cutting edge of the tooth,

and don't bear down on the file. Sharpen every other tooth until you get

back to your mark.

Note: A chain that is sharper on one side than it is on the other will not cut in a

straight line, but will tend to drift up or down, consistent with the sharper

side of the chain. If your blade drifts up or down, check to see that the chain

is equally sharp and the Teeth are the same length on both sides.

Note: After the cutting edges are all sharp, the rakers need to be filed down to give

the teeth the proper cutting depth. See the following procedure to complete

the Beaver Blade sharpening.

6. Hold the flat file horizontal and file down the rakers to the suggested

dimension (Figure 10).

Note: If not enough material is removed from the rakers, the teeth will not cut efficiently. If too much material is removed from the

rakers, the teeth will cut too aggressively and cause instability in the cutting action.

Cutting Edge

Figure 10

.025

Raker