AMS AS3930 매뉴얼 - 페이지 8
{카테고리_이름} AMS AS3930에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMS AS3930 19 페이지. Standard board, demo kit
페이지 인쇄
AS3930 Standard Board
4.2
Description of the GUI of the Receiver
Adjustments can be saved with Store Settings in the lower right hand corner of the Receiver tab.
The default settings can be restored with Preset Default. All configurations that are set by the GUI
correspond to the Register Map of the AS3930 which can be viewed via View/Register Map
(Ctrl+M). The Register Map can be updated manually (File/Readout Registers (Ctrl+R)) or
automatically (File/Automatic Update (Ctrl+U)).
Figure 8: AS3930 GUI -- Receiver Tab
Note: Firmware updates can be done via Help/Firmware Update (Ctrl+F). Load the latest *.bin file to update the firmware.
4.2.1 Settings Descriptions
4.2.1.1
Low Power Mode
The AS3930 features two low power modes which can be selected here. By default no power
saving mode is enabled. Thus, the receiver channel is active all the time. For the On\Off mode the
channel is activated only part of the time to minimize current consumption. For details please see
the AS3930 datasheet.
4.2.1.2
Clock Generator
The clock source for the AS3930 can be selected here. The AS3930 demoboard has an on-board
crystal oscillator that is used by default. When the RC oscillator is selected as clock source, its
precision can be improved by calibrating the oscillator.
ams Demo Kit Manual, Confidential
[v1-02] 2014-Jul-10
Page 8
Document Feedback