Comelit SD01B 기술 매뉴얼 - 페이지 2

{카테고리_이름} Comelit SD01B에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comelit SD01B 2 페이지. Digital vibration detector

Wiring diagram

Instruction

• Sensitivity level setting: 0~7 level can be set, the higher the level, the lower the sensitivity.

the setting level is equal to the sum of the corresponding numbers of the jumper caps that are

shorted. For example: 1 and 4 jumper caps are shorted, 1+4=5, then the level is 5. When all

jumpers are not inserted, it is level 0. Level 0 and Level 1 do not detect piezoelectric vibration

sensor, only detect mechanical vibration sensor.

• Tamper port: Normally closed by default when the cover is installed, and disconnected when

the cover is opened.

• Relay output port: Normally closed by default when power on, and disconnected when alarm.

• Power input terminal: DC 9~24V power supply.

LED working status

• It enters the self-checking status when it is turned on, the green light ﬂ ashes for 20 seconds

• Under normal working conditions, the green light is on

• Under alarm conditions, the red light is on

Note: During the power-on self-test, do not have vibration interference in abnormal use environment.

Disassembly and assembly installation

1. Remove the cover, insert a screwdriver into the gap beside the screw cover, gently pry up the

screw cover, loosen the screws, and then separate the cover and bottom base.

2. Wiring: DC9~24V power supply; TAMPER-tamper ; ALARM-signal line.

3. Remove the bottom base of the detector and ﬁ x it with screws to the position where the holes

need to be installed, or ﬁ x it with AB glue. The detection radius of the installation surface is as

follows:

Installation surface

Detection radius

Note: The above detection radius is for reference only, and it depends on the actual use environment.

C E RT I F I E D M A N A G E M E N T SYST E M S

Concrete

Brick wall

1.5m

2.5m

w w w . c o m e l i t g r o u p . c o m

Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy

Steel plate

Wood board

3.5m

Glass

3.5m

1ª edizione 09/2021

cod. 2G40002820