Comelit 1469 프로그래밍 매뉴얼 - 페이지 8

{카테고리_이름} Comelit 1469에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comelit 1469 10 페이지.
Comelit 1469에 대해서도 마찬가지입니다: 기술 매뉴얼 (11 페이지)

페이지 인쇄

| Table of contents |

VIP CAMERAS

•

Actuator code / address: program the Simplebus address programmed on the internal units to examine

the associated cameras.

•

Camera ViP address: enter the ViP address for the remote camera module art. 1445H.

•

Camera: select the camera connected to the art. 1445H to use.

◊ Camera 1: camera on input 1 of the 1445H.

◊ Camera 2: camera on input 2 of the 1445H.

◊ Camera 3: camera on input 3 of the 1445H.

◊ Camera 4: camera on input 4 of the 1445H.

RTSP CAMERAS

•

Actuator code / address: program the Simplebus address programmed on the internal units to examine

the associated cameras.

◊ RTSP Url: RTSP address of the camera.

◊ RTSP User: RTSP server user name.

◊ RTSP Password: RTSP server password.

Lock-release functions

LOCK-RELEASE FUNCTION 1-2-3

LOCK-RELEASE DURING CALL

This section is used to configure the actions to be carried out if a lock-release command is sent, using a

suitably configured button, from the internal unit during a call in progress.

•

Action 1: enable action 1

•

Relay: select the relay to be activated

◊ SE output: the SE output for the external unit is activated

◊ Relay output: the relay output for the external unit is activated

◊ Virtual output 1: virtual output 1 for the external unit is activated

•

Destination:

◊ Caller: the output is activated on the external unit communicating with the internal unit, regardless of the

ViP address.

◊ Port: the output is activated on the external unit identified by the ViP address set in the parameter below.

•

ViP address: if the port is selected in the above parameter, you need to enter the ViP address of the

external unit on which you want to control the output.

•

Action 2: enable action 2

•