AMS TRIMB 사용자 설명서 - 페이지 2
{카테고리_이름} AMS TRIMB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMS TRIMB 5 페이지.
페이지 인쇄TRIMB
INSTALLATION INSTRUCTIONS
CFX 750 ( FM 750 )
1.
Locate the 2 connectors on the back of
your CFX 750 (FM750) monitor.
5.
Your terminal CFX 750 (FM750)
automatically detects the connection of
a camera.
If no connectors are available,
use the repeater your original
loom from your other hardware
(e.g. power section / steering
control, etc).
TRIMB
CONNECTOR
2.
Connect connector TRIMB at
the back of your monitor CFX 750
(FM750) .
6.
A tab «Camera A»,
top left of your monitor. A tab «Camera B»,
also appear if you connect a second AMS
camera.
USER'S MANUAL
USER'S MANUAL
EXTENSION CABLE
3.
Connect the camera cable with the
dedicated cable TRIMB .
appears at the
www.ams-diffusion.com
www.ams-diffusion.com
Legend :
CONNECTIONS
BEAM
AN AMS CAMERA
4.
Install the camera and connect the
extension cable CR (from 2 to 20 metres),
feed the camera cable to the driving cab.
7.
Select the Camera tab (A or B),
that you want displayed. Refer to your
manufacturer's handbook to change your
video settings.