COMEM DTI 사용 설명서 - 페이지 11

{카테고리_이름} COMEM DTI에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. COMEM DTI 20 페이지. Temperature monitoring unit

Programming of the device

Selection of the baud rate

This setting is significant only for eDTI model.

This setting is indicated on displays with:

• BDR on T1-T2 display

• value to set on T3-T4 display.

With ← and → keys select the baud rate

It's possible to choose between the following values: 2,4 - 4,8 - 9,6 - 19,2 kbps.

Confirm with ENTER.

Baud rate setting

Baud rate: 19200

Baud rate: 9600

Baud rate: 4800

Baud rate: 2400

Selection data bit and stop bit

This setting is significant only for eDTI model.

This setting is indicated on displays with:

• the type of parity on T1-T2 display

• the number of data bit and stop bit on T3-T4 display.

With ← and → keys select the options.

Confirm with ENTER.

Data-stop bit setting

No parity / 8 data bit - 1 stop bit

No parity / 8 data bit - 2 stop bit

Even parity / 8 data bit - 1 stop bit

Odd parity / 8 data bit - 1 stop bit

NOTE

T1-T2 display

BDR

T1-T2 display

EVE

ODD

T3-T4 display

19.2

9.6

4.8

2.4

T3-T4 display

8-1

8-2

8-1