Airsight XX36A 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} Airsight XX36A에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Airsight XX36A 6 페이지. Outdoor wired/wireless ip camera

Step 4: How to use your camera Wirelessly

You should set up your camera using a network cable (wired) first before you attempt to use it wirelessly. (See Hardware

Installation).

1. Make sure your router is a wireless router.

2. Make sure the Wi-Fi antenna is installed on the camera.

3. Determine if your router uses encryption, (see your router's owner's manual for how to do this), if it uses

encryption, note the share key.

4. Login to the camera using the IP Camera Tool, like you did when setting up with a network cable.

5. When you see the screen below, click "Network" then "Wireless Lan Settings" then click on "Scan", wait and

then click it again, when you see your camera in the Wireless LAN settings box, click on it.

6. If there is no encryption, just click "Submit", if there is encryption, input the share key, then click "Submit".

7. Unplug the network cable and wait about 30 seconds while the camera reboots.

For more operation details, please check the full version of the user manual for your IP camera or visit

www.x10.com/support

X10 Wireless Technology, Inc., 400 Forge Way, Rockaway, NJ 07866

Page 6