AMS Controls XL200 ECO 1263 배터리 교체 매뉴얼 - 페이지 9

{카테고리_이름} AMS Controls XL200 ECO 1263에 대한 배터리 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMS Controls XL200 ECO 1263 9 페이지.

11. Insert the new Panasonic CR2354 battery with the positive (+) side facing up by inserting it from

the top side and sliding it under the clip until it snaps into place.

12. Close the boards back on top of the front panel. While lowering the board, reconnect the wires

to the back of the front panel.

13. Screw on the 8 nuts removed in step 5.

14. Place the back cover over the circuit boards.

15. Put the 5 screws back into place that were removed in steps 2 and 3.

Figure 11 - Battery partially removed