Dr. A. Kuntze K 100 W PR 매뉴얼 - 페이지 6
{카테고리_이름} Dr. A. Kuntze K 100 W PR에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dr. A. Kuntze K 100 W PR 20 페이지. Measuring and control instruments for ph and orp measurement
페이지 인쇄
1.2 Features
1.2 Features
Meter
Measuring ranges
Display
Temperature compensation
Calibration
Controller
Set points
Controller types
Hysteresis
P range X
P
Integral time T
Least pulse
Pulse+Pause time
Impulse frequency
Turn-on delay
Alarm function
Connections
Relays
Analog output
Analog inputs
Digital input
Serial interface
(Option)
6
0.00 - 14.00 pH
-1500 - 1500 mV
-30.0 - 140.0 °C
Measured value with dimension
Temperature with dimension
Status display sensor, calibration, controller & alarm
manual or automatic with Pt100
automatic recognition of the calibration solutions
in arbitrary order
2 set points with adjustable direction
ON/OFF controller with hysteresis
P controller as Pulse-Pause-, Impulse-Frequency- or steady controller
PI controller as Pulse-Pause-, Impulse-Frequency- or steady controller
0.00 - 14.00 pH
0.00 - 14.00 pH
0 - 2000 sec.
N
0.1 - 9.9 sec.
02 - 99 sec.
100 - 7200 pulses/h
0 - 200 sec.
min. and max. limit and onset delay
3 potential-free contacts (2x controller, 1x alarm)
6 A, 250 V, max. 550 VA
0/4-20 mA galvanically isolated
max. loading 500 Ohm
1 measuring input for pH or ORP
1 measuring input for temperature sensor Pt100
external controller stop or lack-of-water indication
RS485, Baud rate 9600, data formate 8Bit,
1start and 1stop bit, no parity
K 100 PR & K 100 W PR