Dr. A. Kuntze PH-T 매뉴얼 - 페이지 5

{카테고리_이름} Dr. A. Kuntze PH-T에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dr. A. Kuntze PH-T 12 페이지. Ph and mv simulator for ph/orp meters and ph/orp sensors

1. Instrument test ORP

1 - Connect

Connect the PH-T via the adapter to the ORP cable of your instrument.

2 - Switch on

Switch on the PH-T by pressing key "ON" for 5 seconds.

NOTE

Switch-on is delayed to prevent accidental activation during transport.

3 - Test

Test in progress - if your instrument is working fine, it displays now the same value that

is shown in the display of the PH-T.

By use of the scroll keys of the PH-T you can set an arbitrary value within +/-1500mV.

Your instrument must react within a few seconds to any changes and finally show the

same value as the PH-T.

NOTE

If you press a scroll key once, the value increases or decreases by 1 .

Hold it, and the value starts changing continuously, first slowly, then

faster.