AmScope HD408L 사용자 설명서 - 페이지 6

{카테고리_이름} AmScope HD408L에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AmScope HD408L 20 페이지. 4k multi-function cameras

H D4 08 L User G ui de

Stand-Alone Mode

This HD series camera can be used in stand-alone mode when connected to a compatible video display such as a monitor

or television. The camera's controls and settings are accessed using the supplied USB mouse.

Begin by attaching one end of the supplied HDMI cable to the camera's HDMI port. Connect the other end of the cable to

the monitor's or television's HDMI input. The video display may need to be manually configured to use the correct input.

If so, consult the video display's manual. Connect the supplied USB mouse to the camera by attaching its USB plug to the

camera's USB port labeled "USB Mouse". Next, connect the supplied power adapter by inserting its barrel connector to

the camera's power port labeled "DC 12V". The power indicator located above the power port should be red which indi-

cates the camera is receiving power. Press the camera's power button to initialize the camera. The power indicator will

change to blue. It will take several seconds for the camera's software to boot, during which a cursor will appear on the

screen. Once the camera is fully booted, you can move the cursor around the screen to activate the on-screen controls.

amscope.com