AMSEC ESL20 운영 지침 - 페이지 3

{카테고리_이름} AMSEC ESL20에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AMSEC ESL20 4 페이지. Electronic safe lock

페이지 인쇄

American Security Product Co.

A function is set in the following standard format:

C - # - (2 Digit Function Code) - # - (Master User Code) - # - (Function Setting) - #

↑

SGCT

After each "#", a Short Good Combo Tone (

pressed, at which time it gives a Long Good Combo Tone (L

of a function. Any time during the sequence, if incorrect numbers are pressed, a Bad Combo Tone

(4 short beeps) will sound and the lock will go to rest. A function that has an on/off condition rather

than a numeric setting requires a 1 (on) or a 0 (off) as the Function Setting.

Note: If a default setting is what is desired, then the setting of that function is not necessary.

5.1 Time Delay Settings (Functions 01, 02 & 03)

5.1.1

To Enable Time Delay:

C - # - 01 - # - (Master Code) - # - 1 - #

5.1.2

To Disable Time Delay:

C - # - 01 - # - (Master Code) - # - 0 - #

5.1.3

To set the Delay Period:

C - # - 02 - # - (Master Code) - # - (Delay Period, 1-99 minutes) - #

5.1.4

To set the Open Period:

C - # - 03 - # - (Master Code) - # - (Open Period, 1-9 minutes) - #

Time Delay Setting Example. To set Time Delay for 12 minutes, Open Period to 4 minutes and

the Master Combo is 159260, you must execute 3 function codes as follows:

First, Enable the Time Delay with

Then, set the Delay Period with

And finally set the Open Period with

5.2 Multiple User Settings (Functions 10, 11, 12 & 13)

5.2.1

To Enable Multiple User Mode:

C - # - 10 - # - (Master Code) - # - 1 - #

5.2.2

To Disable Multiple User Mode:

C - # - 10 - # - (Master Code) - # - 0 - #

5.2.3

To Add or Enable a Subordinate User:

C - # - 11 - # - (Master Code) - # - (User Number, 1-8) - #

5.2.4

To Disable a Subordinate User:

C - # - 12 - # - (Master Code) - # - (User Number, 1-8) - #

Document Part No. 4305149, Revision C

↑

SGCT

LGCT

) will be given, until the last "#" of the sequence is

SGCT

) indicating the successful setting

GCT

C-#-01-#-159260-#-1-#

C-#-02-#-159260-#-12-#

C-#-03-#-159260-#-4-#

5.2.5

To Disable all Subordinate Users (1-8):

C - # - 13 - # - (Master Code) - # - 1 - #

Note: Disabling a Subordinate User does not erase the combo associated to that user, so if you

re-enable that User number it is not necessary to re-enter a combo for it unless you are

treating it as a new user.

Enabling Multi-User Mode and Adding a New User Example. To add a User 3 and set a

combination for that User, the Master Combo is 159260 and set User 3 combo to 121314:

First, Enable Multiple User Mode with

Then, Add User 3 with

And finally set a combo for User 3

5.3 Duress Alarm (Function 20)

5.3.1

To Enable Duress Mode:

C - # - 20 - # - (Master Code) - # - 1 - #

5.3.2

To Disable Duress Mode:

C - # - 20 - # - (Master Code) - # - 0 - #

5.4 Dual Combo (Functions 30 & 31)

5.4.1

To Enable Dual Combo Mode:

C - # - 30 - # - (Master Code) - # - 1 - #

Note:

Enabling Dual Combo Mode turns on (enables) User 1 if a User 1 is not already active in

Multi-User mode. The User 1 combo must be set before this feature will function. See

Section 4 for changing instructions.

5.4.2

To Disable Dual Combo Mode:

C - # - 30 - # - (Master Code) - # - 0 - #

5.4.3

To Enable 2 Subordinate User Opening in Dual Combo Mode:

C - # - 31 - # - (Master Code) - # - 1 - #

5.4.4

To Disable 2 Subordinate User Opening in Dual Combo Mode:

C - # - 31 - # - (Master Code) - # - 0 - #

5.5 Armored Car TDL Bypass (Functions 40 & 41)

5.5.1

To Enable Armored Car TDL Bypass:

C - # - 40 - # - (Master Code) - # - 1 - #

Note: Enabling Armored Car Bypass turns on (enables) User 9, which is the Armored Car User.

The User 9 combo must be set before this feature will function. See Section 4 for

changing instructions.

18 Sept. 2000

American Security Product Co.

C-#-10-#-159260-#-1-#

C-#-11-#-159260-#-3-#

C-#-3-#-159260-#-121314-#-121314-#