AMSEC BF912 사용 설명서 및 보증 - 페이지 4

{카테고리_이름} AMSEC BF912에 대한 사용 설명서 및 보증을 온라인으로 검색하거나 PDF를 다운로드하세요. AMSEC BF912 6 페이지.

Combination Changing Instructions for the ESL5-LP Electronic Safe Lock

Combination changes should always be done with the door locked OPEN.

To change the combination, do the following:

a. Press the keys "C" and then "#". The unit responds with a short warbling tone (called the "good

combo tone") and the keypad lamps strobe with the tone.

b. Now key in the old 6 digit combination. The "C" key may be used to clear an error in keying at any

time. Finish the input with a "#" key.

1. If the old combination keyed matches the existing combination in permanent memory, another

short good combo tone is sounded. Proceed to "c. "

2. If the combination keyed is incorrect, the unit responds with 4 short beeps (called the bad

combo tone) and returns to rest. The combination change routine is aborted and the old

combination is retained. This also causes a count up for Penalty Lockout.

c. Now key the first pass with the New 6 digit combination followed by a "#" key. Again, the "C" key may

be used to clear an error in keying at any time.

1. If the combination input is 6 digits in length, another short good combo tone is sounded.

Proceed to "d. "

2. If the combination keyed is not 6 digits long, the unit responds with 4 short beeps (bad combo

tone) and returns to rest. The combination change routine is aborted and the old combination is

retained.

d. Now key the second (verify) pass with the New 6 digit combination followed by a "#" key. As before,

the "C" key may be used to clear an error in keying at any time.

1. If the combination input matched the first pass, a long good combo tone is sounded. The new

combination replaces the old combination in permanent memory and the unit returns to a

resting condition. Proceed to "e. "

2. If the combination keyed does not match the first pass, the unit responds with the bad combo

tone and returns to rest. The combination change routine is aborted and the old combination is

retained.

e. Test your new combination several times prior to closing and locking the safe.

-- CAUTION --

Liquids can damage the keypad

CAUTION!