AMSEC ESLAudit 사용 설명서 - 페이지 8
{카테고리_이름} AMSEC ESLAudit에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMSEC ESLAudit 15 페이지. Access control system
AMSEC ESLAudit에 대해서도 마찬가지입니다: 빠른 참조 (4 페이지)
페이지 인쇄
User Administration
Adding Users (restricted to managing user levels)
1. Login.
2. Press "3" (Admin).
3. Press "2" (Users).
4. Press "1" (Add).
5. Select User Profile with softkeys.
6. Press ENTER/SAVE key.
7. Select login type with softkeys (key/PIN, PIN only, key only).
8. Press ENTER/SAVE key.
9. If applicable, you will be asked to present the key to the key reader.
10. Enter username.
11. Press the ENTER/SAVE key.
If you enroll a new key/PIN user, the user will be enrolled with an initial PIN of
1,1,1,1,1,1. If you enroll a PIN-only user, the initial PIN will be their two digit user
number followed by six 1's (X,X,1,1,1,1,1,1). The user will be required to enter a new PIN
upon first login. PINs that are in use by another user or that are deemed too simple will
not be allowed.
Users can also be enrolled with the use of a PC application called ESLConfig.
Editing a User's Profile (restricted to managing user levels)
1. Login.
2. Press "3" (Admin).
3. Press "2" (Users).
4. Press "2" (Edit).
5. Use
and
¬
6. Press the ENTER/SAVE Key to select the user.
7. Select a user profile using the
8. Press the ENTER/SAVE Key.
9. Select a user login type.
10. Press the ENTER/SAVE key.
11. Present the user's Dallas key to the reader (if applicable).
12. Edit the username.
13. Press the ENTER/SAVE key
Deleting a User (restricted to managing user levels)
1. Login.
2. Press "3" (Admin).
3. Press "2" (Users).
4. Press "3" (Delete).
5. Use the
¬
6. Press the ENTER/SAVE key to select the user.
softkeys to scroll to find the user you wish to edit.
®
¬
and
softkeys to scroll to find the user you wish to edit.
®
and
softkeys.
®
7