Electrolux 2223 208-81 사용자 설명서 - 페이지 4
{카테고리_이름} Electrolux 2223 208-81에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 2223 208-81 20 페이지. Electrolux fridge-freezer user manual
페이지 인쇄
OPERATION
Before using
Remove all securing tapes. Wash inside the
appliance with lukewarm water and bicarbonate of
soda (5 ml to 0.5 litre of water).
Do not use soap or detergent as the smell may
linger. Dry thoroughly.
Control panel
A -
Pilot light - Green
B -
Thermostat control knob
C -
Fast freeze light - Amber
D -
Fast freeze switch
Control Panel
A. Pilot light
The operation light is illuminated continuously, to
show that the appliance is on.
B. Thermostat control knob
Turn the thermostat control knob clockwise to
required setting.
C. Fast freeze light
The fast freeze light is illuminated, to show that the
fast freeze function is working.
D. Fast freeze control switch
When you place fresh food in the appliance, press
the fast freeze control switch.
Start your appliance
Allow the appliance to stand for 2 hours after
installation.
Insert the plug into the wall socket. The pilot light (A)
will illuminate to show that the appliance is on.
Turn the thermostat control (B) to a midway setting.
Leave the appliance for approximately 4 hours for
the correct temperature to be reached before placing
food inside.
To switch off the appliance turn the thermostat
control to position "O" .
4
1
2
6
3
5
4
Temperature control
The temperature within the freezer is controlled by
the thermostat situated in the middle of the
appliance.
To operate the freezer proceed as follows:
Position 1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat control knob beyond the «O»
position.
When you first start the fridge-freezer, we suggest
that you turn the thermostat control to a medium
setting. For easier turning of this control, use a small
coin.The internal temperature of the fridge-freezer is
automatically adjusted by the thermostat to ensure
safe food storage.
However, if the appliance is working in unfavourable
room conditions such as
-
poor ventilation,
-
high temperature,
-
frequent door openings,
it may be necessary to select a more suitable
setting.