Electrolux 241540105 (0612) 사용 및 관리 매뉴얼 - 페이지 9

{카테고리_이름} Electrolux 241540105 (0612)에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 241540105 (0612) 42 페이지. Side-by-side refrigerator

Connecting The Water Supply

The automatic ice & water dispenser on your refrigerator requires a permanent

water supply to function correctly. During installation, you (or a service

professional) establish this water supply by connecting a copper tube from your

household water system to a valve at the rear of the refrigerator.

You may have already followed the directions in the Installation Instructions to

connect the water supply. This information is repeated here for future reference if

you need to relocate your refrigerator.

CAUTION

UTION

To avoid property damage:

• Use copper tubing for the water supply line (plastic tubing is more

likely to leak). Manufacturer is not responsible for any damage if

plastic tubing is used for supply line.

• Ensure water supply complies with local plumbing codes.

• For proper dispenser operation, recommended water supply pressure

should fall between 20 psi and 100 psi. Excessive pressure may cause

water filter to malfunction.

What you will need:

• Access to a cold water line with pressure of 30-100 psi.

• Copper tubing with ¼-inch (6.4mm) OD. Length for this tubing is the distance

from the rear of the refrigerator to your household water supply line plus 7

feet (2.1 meters).

• A shut-off valve for the connection between your household water line and

the refrigerator supply line.

Do not use a self-piercing shut-off valve.

• A compression nut and ferrule (sleeve) for the water supply connection at the

rear of your refrigerator.

NOTE

Electrolux Kit #53039117950, available from your dealer, provides all materials for a water

supply installation, including 25 feet of copper tubing and full instructions.