Electrolux 242232501 사용 및 관리 매뉴얼 - 페이지 7

{카테고리_이름} Electrolux 242232501에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 242232501 19 페이지.

페이지 인쇄

Door Reversal

The side on which the door opens can be

changed from the right side (as supplied) to

the left side if the installation site allows.

WARNING

When reversing the door, the appliance

must not be connected to the power

source. Ensure that the plug is

removed from the power source.

Tools you will need:

8 mm socket driver

Phillips screwdriver

Putty knife or thin-blade screwdriver

8 mm wrench

NOTE

Before you start, lay the refrigerator on its

back in order to gain access to the base.

You should rest it on soft foam packaging

or similar material to avoid damaging the

backboard of the refrigerator.

To reverse the door:

1 Stand the refrigerator upright. Open

the upper door. Take out all door

racks (to avoid damaging the racks)

and then close the door.

Reversing the Door

2 Open upper cover ① on top of the

refrigerator body from right side and

then remove the upper hinge cover

② and magnetic switch box ③.

3 Remove the corner cover.

4 Remove the screws ①, and remove

part ②.

Special Flange

Self-tapping

Screws

Door

Racks

Be sure doors are set aside in a

secure position where they cannot

fall and cause personal injury, or

damage to the doors or handles.

Upper Cover

Upper Hinge

Cover (Right)

Magnetic

Switch Box

CAUTION

Part