Electrolux 400 LT 설치 및 운영 매뉴얼 - 페이지 18

{카테고리_이름} Electrolux 400 LT에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 400 LT 32 페이지. Vertical refrigerators

• If the power cable is damaged, it must be replaced by the Customer Care Service or in

any case by specialised personnel, in order prevent any risk.

• The manufacturer declines any liability for damage or injury resulting from breach of the

above rules or non-compliance with the electrical safety regulations in force in the

country where the machine is used.

Electrical connection for appliances with plug

• To connect to the power supply, insert the power cable plug in the corresponding mains

socket, first making sure:

• the socket has an efficient earth contact and the mains voltage and frequency match

that given on the dataplate. In case of any doubts regarding the efficiency of the earth

connection have the system checked by specialised personnel;

• the system power supply is arranged and able to take the actual current absorption and

that it is correctly executed according to the regulations in force in the country of use;

• The plug must be accessible after positioning the appliance in the place of installation;

• The plug must be in a position always visible to the operator performing the intervention

during maintenance operations;

Electrical connection for appliances with cable without plug

• The connection point has an efficient earth contact and the mains voltage and frequency

match that given on the data plate. In case of doubts regarding the efficiency of the earth

wire, have the system checked by specialised personnel;

• the appliance must be permanently connected to the power supply, respecting the

polarities:

– brown/black/gray: phase

– yellow/green: earth

– blue: neutral;

• An H05VV-F type power cable (code 60227 IEC 53) is used for the permanent

connection to the mains; in case of replacement, use a type with at least these

characteristics. When replacing the cable, the earth wire must be kept longer than the

live and neutral wires.

• The differential thermal-magnetic switch must be lockable in the open position in case of

maintenance.

• If using a plug, it must comply with the national installation rules. The plug must also be:

– accessible after the appliance has been positioned

– in the place of installation;

– in a position always visible to the operator performing the intervention during

maintenance operations;

Positioning

• Install the appliance, taking all the safety precautions required for this type of operation,

also respecting the relevant fire-prevention measures.

W W A A R R N N I I N N G G

• Keep the ventilation openings in the appliance casing free of any obstructions.

Fitting anti-tipping cables on the glass door appliances with high feet

• When installing the glass door appliances with high feet make sure to fix the anti-tipping

cables to it.

• To fit proceed as shown in the paragraph F.5 Fitting anti-tipping cables