Electrolux 42 사용 설명서 및 설치 지침 - 페이지 27

{카테고리_이름} Electrolux 42에 대한 사용 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 42 45 페이지. 30” and 36” free-standing range hood
Electrolux 42에 대해서도 마찬가지입니다: 설치, 사용 및 관리 매뉴얼 (22 페이지)

페이지 인쇄

SIDE PANELS

Side panels (not

supplied) must be

used whenever

the sides of the

refrigerator will be

exposed. The 1/4"

side panels will slip

into the side case

trim. Order side

panels from your

cabinet manufacturer.

*Depending on

installation height.

FLOORING

For proper installation, this refrigerator must

be placed on a level surface of hard material

that is at the same height as the rest of the

flooring. This surface should be strong

enough to support a fully loaded refrigerator,

or approximately 1500 lb.

NOTE: Protect the finish of the flooring. Cut a

large section of the cardboard carton and place

under the refrigerator where you are working.

Installation Instructions

24"

*84"

*3" to 4"

1-1/2"

GROUNDING THE REFRIGERATOR

IMPORTANT—Please read carefully

FOR PERSONAL SAFETY, THIS APPLIANCE

MUST BE PROPERLY GROUNDED.

The power supply cord of this appliance is

equipped with a three-prong (grounding)

plug which mates with a standard three-

prong (grounding) wall receptacle to

minimize the possibility of electric shock

hazard from this appliance.

Have the wall outlet and circuit checked by a

qualified electrician to make sure the outlet is

properly grounded.

Where a standard 2-prong wall outlet

is encountered, it is your personal

responsibility and obligation to have it

replaced with a properly grounded 3-prong

wall outlet.

DO NOT, UNDER ANY

CIRCUMSTANCES, CUT

OR REMOVE THE THIRD

(GROUND) PRONG

FROM THE POWER CORD.

DO NOT USE AN ADAPTER PLUG TO

CONNECT THE REFRIGERATOR TO A

2-PRONG OUTLET.

DO NOT USE AN EXTENSION CORD

WITH THIS APPLIANCE.