Electrolux BM Series 사용자 설명서 - 페이지 9

{카테고리_이름} Electrolux BM Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux BM Series 18 페이지. Refrigeration
Electrolux BM Series에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지)

페이지 인쇄

Electronic display controls – Electronic models

The electronic display panel consists of an LCD display with

white backlighting and 6 touch buttons. When the power

is first turned on, the display with backlighting will come on.

If no buttons have been pressed and the fridge door is

closed the backlighting will turn off after 30 seconds.

NOTE: If no buttons have been pressed for approximately

60 seconds, there may be a delay of up to 2 seconds before

the display reacts. This is normal and is to prevent accidental

changes to settings.

Controlling the temperature

We recommend that when you start your refrigerator for the first

time, the temperature for the refrigerator is set to 3°C and the

freezer to -18°C. If you want to change the temperature, follow

the instructions below. Make only small adjustments and wait

24 hours to see if it's correct. Checking the softness of ice cream

is a good indication if your freezer is the right temperature, while

feeling the coldness of water kept in the refrigerator is a good

way of checking the temperature of the food compartment.

NOTE: When you set a temperature, you set an

average temperature for the whole refrigerator cabinet.

Temperatures inside each compartment may vary,

depending on how much food you store and where you

place it. High or low room temperature may also affect the

actual temperature inside the refrigerator.

Changing the freezer temperature

Press the freezer button to make the freezer

colder in 1°C steps. Once the maximum of

-23°C is reached, the display will return to

-14°C with the next press of the button. The bar graph gets

smaller with colder freezer settings.

Changing the refrigerator temperature

Press the fridge button to make the

refrigerator colder in 1°C steps. Once 0°C is

reached, the display will return to 7°C with

the next button press. The bar graph gets smaller with

colder refrigerator settings.

Fast freeze function

Use the fast freeze function when you add a

large amount of food to the freezer

compartment. This freezes the food quickly

but does not affect the temperature in the refrigerator

compartment. To use this function, press the fast freeze

button once. An animated icon will light up. The fast freeze

function will now operate for 90 minutes. If you want to turn

the fast freeze function off before 90 minutes have passed,

simply press the fast freeze button again. The icon will

disappear and the freezer will return to normal operation.

electrolux refrigeration electronic display controls - electronic models 4

Freezer temperature alarm

the freezer door being left open or warm food being placed

too close to the temperature sensor, a buzzer will sound.

The icon adjacent to the alarm reset button, the freezer set

temperature and bar graph will all flash, until the alarm reset

button is pressed. Once pressed, the alarm disable icon

adjacent to the alarm button will illuminate for 50 minutes,

or until the temperature drops to an acceptable level.

Make sure nothing is holding the freezer door open and

move any warm food away from the temperature sensor. If

the freezer is still too warm after 50 minutes, the alarm will

sound again, indicating that something may be wrong with

the refrigerator.

NOTE:

The freezer temperature alarm can be reset for 12 hours

by pressing the alarm reset button continuously for 10

seconds.

Door alarm

If the fridge door is left open for more than two minutes, the

alarm will buzz and an arrow pointing to an open door will

flash, along with the temperature setting and bar graph.

If you want to leave the door open while you load the

refrigerator, you can turn the alarm off for 8 minutes by

pressing the alarm reset button.

Child Lock

buttons together.

Drinks chill timer

to a maximum of 30 minutes. To set, simply press the

drinks chill button repeatedly for the number of minutes (in

5-minute intervals). Once set, an animated icon appears

beside the drinks chill button, with a timer that counts down

one minute at a time.

You can change the time or turn the timer off even after the

countdown has started. A buzzer will tell you when the time

is finished and the icon will flash until the alarm reset button

is pressed.

If your drink is not cold enough, reset the drinks chill

function (remembering the drink is already partially chilled).

Suggested chilling times:

• 10 minutes for cans of drink

• 20 minutes for bottles of wine

• 30 minutes for bottles of soft drink.

If the alarm sounds for no apparent reason,

check whether anything is keeping the door

open. If the freezer becomes too warm due to

Press and hold the freezer and

fridge buttons together to

activate the child lock. This will

disable the display to prevent

accidental changes to settings.

To turn the child lock off, press

and hold the freezer and fridge

The drinks chill timer is used to quickly chill a

bottle. Place the bottle in the freezer and the

timer can be set for a minimum of 5 minutes