Electrolux Built-In Dishwasher 사용 및 관리 매뉴얼 - 페이지 20

{카테고리_이름} Electrolux Built-In Dishwasher에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux Built-In Dishwasher 28 페이지. Built-in oven
Electrolux Built-In Dishwasher에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (36 페이지), 사용 및 관리 매뉴얼 (44 페이지), 설치 지침 매뉴얼 (28 페이지), 사용 및 관리 매뉴얼 (40 페이지), 사용 및 관리 매뉴얼 (27 페이지), 사용 및 관리 매뉴얼 (12 페이지), 사용 및 관리 매뉴얼 (22 페이지), 팁 및 레시피 (36 페이지), 사용 설명서 (18 페이지), 오워 매뉴얼 (21 페이지), 오워 매뉴얼 (13 페이지), 소유자 매뉴얼 (29 페이지), 사용자 설명서 (27 페이지), 지침서 (17 페이지), 지침서 (15 페이지), 지침서 (18 페이지), 지침서 (27 페이지), 지침서 (18 페이지), 서비스 매뉴얼 (50 페이지)

Occasionally wipe the outside surfaces of your dishwasher with a mild

nonabrasive detergent and water. Rinse and dry.

Stainless Steel Door

Clean the stainless steel door and handle with hot, soapy water and a dishcloth.

Rinse with clean water and a cloth. Do not use harsh scrubbing cleaners. Use only

kitchen cleaners made especially for cleaning stainless steel.

Remove spots on the door and tub with a damp, nonabrasive cloth. If needed,

clean around the tub gasket area with a damp cloth.

IMPOR

IMPORT T T T T ANT

ANT

Read before operating your dishwasher!

Food Particle Trap

Care of Filter

Your dishwasher is equipped with a state of the art wash system. The invisible

direct feed wash system delivers water using pulse wash technology resulting in a

quiet, more efficient wash.

Periodically, the filter and food particle trap assembly may need to be cleaned to

maximize wash performance. Your dishwasher may indicate this need by flashing

"CF" in the display window. Remove, clean and replace filter and food particle trap

assembly as instructed below.

1 Clear the filter and food particle trap assembly of all

debris.

2 Remove the food particle trap assembly by rotating the

handle 90° in a counterclockwise direction and clean

with water and mild soap.

3 Lift filter to remove being careful to prevent any food

from falling into drain pump area. Clean with water and

mild soap.

4 Replace filter and food particle trap assembly.

5 Rotate and lightly pull the food particle trap assembly

90° in a clockwise direction to ensure the assembly

locks in place.

Care & Cleaning