Bosch 800 Series 사용 및 관리 매뉴얼 - 페이지 20

{카테고리_이름} Bosch 800 Series에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 800 Series 40 페이지. Built-in wall ovens
Bosch 800 Series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (24 페이지), 설치 매뉴얼 (40 페이지), 사용 및 관리 매뉴얼 (12 페이지), 설치 매뉴얼 (23 페이지), 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (32 페이지), 사용 설명서 (32 페이지), 설치 매뉴얼 (32 페이지), 빠른 시작 및 안전 매뉴얼 (7 페이지), 사용 및 관리 매뉴얼 (40 페이지), 설치 매뉴얼 (40 페이지), 설치 매뉴얼 (32 페이지), 설치 지침 매뉴얼 (40 페이지), 설치 매뉴얼 (48 페이지), 사용 및 관리 매뉴얼 (33 페이지), 사용 및 관리 매뉴얼 (49 페이지), 빠른 시작 매뉴얼 (7 페이지), 빠른 시작 및 안전 매뉴얼 (13 페이지), 설치 매뉴얼 (32 페이지), 서비스 매뉴얼 (36 페이지), 설치 지침 매뉴얼 (29 페이지), 사용 및 관리 매뉴얼 (24 페이지), 설치 지침 매뉴얼 (28 페이지)

페이지 인쇄
Bosch 800 Series 사용 및 관리 매뉴얼
en-us Basic Operation
12.2 Switching on the appliance
Touch
with a short 1 second touch.
▶
The cycle last selected and the option last selected will
be set by default.
The buttons on the appliance are touch sensitive and
only require a quick, gentle touch.
If you do not perform any actions on the appliance for
10 minutes, it will automatically switch off.
12.3 Setting a cycle
To adjust the wash cycle to the soiling level of the
dishware, select a suitable program.
Press the right cycle button.
▶
a The cycle is set and the cycle button flashes.
a The remaining run time of the cycle appears on the
display.
12.4 Setting options
You can set options to complete the chosen wash
program.
Note: The available options depend on which program is
selected.
Press the button for the relevant option.
▶
a The option is set and the option button flashes.
12.5 Setting the time delay
You can delay the start of the wash cycle via the
Home Connect® app.
Open the Home Connect® app and select the
▶
appliance.
In the settings, you can use the time delay function to
delay the start of the wash cycle.
12.6 Starting the wash cycle
Press
.
▶
a The wash cycle has ended when the display shows
"00h:00m".
Notes
¡ If you want to add more dishware while the appliance is
running, do not use the collecting tray as a handle for
the upper rack. You might touch the partially dissolved
tablet.
¡ You can only change a cycle in progress if you can
cancel it first.
→  "Terminating the wash cycle", Page 20
¡ To save energy, the appliance switches off
automatically 10 minutes after the end of the wash
cycle. If you open the appliance door immediately after
the wash cycle has ended, the appliance will switch off
after 4 seconds.
20
12.7 Interrupting the wash cycle
Press On/Off.
1.
The program is saved and the appliance switches off.
Press On/Off.
2.
Press
to resume the wash cycle.
3.
12.8 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
Press
for approx. 4 seconds.
▶
a All displays light up.
a As soon as the displays are off, the display shows
"00h:01m" and the residual water is pumped out.
a The cycle is cancelled and ends after approx. 1 minute.
12.9 Switching off the appliance
CAUTION
To avoid risk of injury, always use caution when opening
the door during or following a wash cycle as hot water or
steam may escape.
Do not fully open the door until water noises have
▶
stopped and steam has subsided.
Please note the information on Preventing Material
1.
Damage →  Page 6 .
Press On/Off.
2.