Bosch Apexx SHY99A 설치 지침 매뉴얼 - 페이지 17
{카테고리_이름} Bosch Apexx SHY99A에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Apexx SHY99A 34 페이지. Dishwasher
Bosch Apexx SHY99A에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (34 페이지), 설치 지침 매뉴얼 (21 페이지)
페이지 인쇄
A
Figure
12/Hus. 12
Figure
13/Hus. 13
Figure
14/Hus. 14
English
DISHWASHER PREPARATION
(continued)
Removing
the Toe Panel
Regular
Toe Panel
The toe panel is loosely attached with
tape. Remove the tape and putt the toe
panel away from the dishwasher.
Set
the toe panel aside. It will be reinstalled
later.
SHY6$ and SHX56 Base and Toe Panel
The base and toe panel are in place on
the dishwasher,
but are not attached.
Remove the toe panel first, as shown in
Figure 12, letter A, then remove the
base, as shown
in Figure 12, letter B
_nstalHng the 90 ° Elbow Fitting
NOTE: The 90 ° elbow fitting is not
supplied
with the dishwasher,
and
must be purchased
separately.
If the
dishwasher's
hot water suppty line is to
be copper tubing, make certain the
elbow
has a compression
fitting.
Apply Teflon tape or other pipe sealant
to all threaded
connectors.
Orient the hot water supply connection
leg of the elbow toward the channel
opening
in the dishwasher
base.
Junction
Box Preparation
1) Remove the junction
box cover by
removing the screw on the left side of
the junction
box, as shown in Figure 13,
letter C, and lifting the junction
box
cover up and off.
2) Remove the strain relief plate by
removing the screw at the back of the
unction
box, as shown in Figure 14,
letter D and sliding the strain relief
31ate out,
3) Set the junction
box cover, strain
relief plate, and screws aside. They will
be re-installed
later.
16
Dishwasher
Preparation
} Pr¶tio
du Lave°Vaiselle
} Preparaci6n
_ La Lavadora