Bosch Apexx SHY99A 설치 지침 매뉴얼 - 페이지 18

{카테고리_이름} Bosch Apexx SHY99A에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Apexx SHY99A 21 페이지. Dishwasher
Bosch Apexx SHY99A에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (34 페이지), 설치 지침 매뉴얼 (34 페이지)

페이지 인쇄

Figure 26/Ilus. 26

Figure 27/Ilus. 27

Electrical Connection | Connexion Électrique | Conexión Eléctrica

ELECTRICAL CONNECTION

WARNING: ELECTRICAL SHOCK

HAZARD - Working on an energized

circuit could result in serious injury

or death. Only qualified electricians

should perform electrical work. Do

not attempt any work on the dish-

washer electric supply circuit until

you are certain the circuit is de-

energized.

WARNING: FIRE HAZARD -

Improper electrical work can cause

fire. Only qualified electricians

should perform electrical work.

Grounding Instructions

The dishwasher must be properly

grounded before operating. This

appliance must be connected to a

grounded metal permanent wiring

system, or an equipment grounding

conductor must be run with the circuit

conductors and connected to the

equipment grounding terminal or lead

on the dishwasher. Make sure that the

dishwasher is connected to a suitable

ground in compliance with all local

codes or, in the absence of a local

code, with the NATIONAL ELECTRI-

CAL CODE in the United States or the

CANADIAN ELECTRIC CODE C22.1-

latest edition in Canada as well as

any provincial/state or municipal or

local codes that apply.

1) Retrieve the strain relief plate, and

install a strain relief (not supplied) into

the opening on the strain relief plate.

NOTE: Orient the strain relief as

shown in Figure 26.

2) Pass the electrical supply cable

through the strain relief, as shown in

Figure 27. Leave 3 - 4 inches of

insulated wire extending through the

strain relief plate.

3) Tighten the strain relief screws.

4) Slide the strain relief plate into the

junction box, and secure it to the

junction box with the supplied screw.

(Continued on next page)

E n g l i s h